PulsElectronic

BT Series Load Cell

external image bt_series_load_cell_little.jpg

The BT series load cell was developed for low or middle capacity applications. It has special alloy steel and shows high results in weighing performance.
This stainless steel and nickel-plated load cell is highly protected from external agents such as rain, dust, water that can make troubles for a good performance.
The BT load cell works with principle of bending beam. Due to that some vibrations appearing during the weighing process are muffled. That guarantees extremely accurate weighing result.
The cable output of the BT load cell is sealed to metal nipple. The protection level is IP67. The BT load cell is produced with 3 metres lengthwise screened cable.

General Application
- Packaging and filling machines
- Dosing system
- Band weighing machines
- Check weigher
- Tension control applications
- Platform scales with low capacity

Capacity
The BT load cell is produced in 10, 20, 50, 100, 200, 500 kg capacities

Technical Specifications

Type	BT
Accuracy class	C1	C3
Capacity (Emax)	10,20,50,100,200,500 kg
Minimum dead load	0% R.O
Rated output R.O	2,0 mV/V
Maximum number of load cell interval Nmax	1000	3000
Vmin	Emax/4000	Emax/10000
Emax / Vmin	4000	10000
Minimum dead load output return (MDLOR)	<0,0500 %R.O	<0,0167 %R.O
Zero balance	1 %R.O
Temperature effect on zero	<< 0,0070 %R.O/5°C
Temperature effect on output	< 0,0055 %R.O/5°C
Compensated temperature range	-10 /+40 °C
Temperature range safe	-30 /+70 °C
Maximum safe central overload	150 %R.O
Ultimate central overload	300 %R.O
Excitation	5 V
Input impedance	380±20 ?
Output impedance	350±3 ?
Insulation resistance	>1000 M?
Construction	Nickel plated alloy steel
Environmental protection	IP67
Cable type	2x2x0,22 mm
Cable length	3 m
Weight	0,6kg

MT Series Load Cell

external image mt_series_load_cell_small.jpg

MT series load cells are made from special anodized aluminium alloy that isolates it from corrosion and industrial environments. Work with bending beam principle. MT type load cells were designed for tension or compression or for both tension and compression applications. It is highly resistant to eccentric loading. The platform sizes are 15 cm x 15 cm. The sensing element is covered with silicone that protects it from dust and humidity.

General Applications
- Packaging and filling machines
- Counter scales
- Market scales

Capacity
The MT series load cells are produced in 1,2,3 kg capacities.

Technical Specifications

		Type	MT
		Accuracy class	C1
		Capacity (Emax)	1-2-3Kg
		Minimum dead load	0% R.O
		Rated output R.O	1,0 mV/V
		Maximum number of load cell interval Nmax	1000
		Vmin	Emax/4000
		Emax / Vmin	4000
		Combined error	0,030 %R.O
		Minimum dead load output return (MDLOR)	<0,0500 %R.O
		Zero balance	1 %R.O
		Temperature effect on zero	<< 0,0175 %R.O/5°C
		Temperature effect on output	< 0,0085 %R.O/5°C
		Compensated temperature range	-10 /+40 °C
		Temperature range safe	-30 /+70 °C
		Maximum safe central overload	150 %R.O
		Ultimate central overload	300 %R.O
		Excitation	5 V
		Input impedance	395±20 ?
		Output impedance	350±3 ?
		Insulation resistance	>1000 M?
		Construction	Adonized aluminium alloy
		Environmental protection	IP66
		Cable type	4x0,22 mm
		Cable length	50 cm

RT Series Load Cell

external image rt_series_load_cell_little.jpg

RT-3C series load cells are made from special anodized aluminium alloy that isolates it from corrosion and industrial environments. Work with bending beam principle. RT-3C type load cells were designed for tension or compression or for both tension and compression applications. It is highly resistant to eccentric loading. The platform sizes are 60 cm x 60 cm. The sensing element is covered with special silicone that protects it from dust and humidity.

General Applications
- Packaging and filling machines
- Check weigher
- Counter scales
- Band weighings
- Market scales

Capacity
RT-3C series load cells are produced in 100, 300, 600 kg capacities.

Technical Specifications

Type	PLATFORM SERISI(PS,RT)
Accuracy class	C1	C3 OIML R60
Capacity (Emax)	6,10,20,30,40,50,100,300,600Kg
Minimum dead load	0% R.O
Rated output R.O	2,0 mV/V
Maximum number of load cell interval Nmax	1000	3000
Vmin	Emax/4000	Emax/10000
Emax / Vmin	4000	10000
Combined error	0,030 %R.O	0,020 %R.O
Minimum dead load output return (MDLOR)	<0,0500 %R.O	<0,0167 %R.O
Zero balance	1 %R.O
Temperature effect on zero	<< 0,0175 %R.O/5°C	< 0,0070 %R.O/5°C
Temperature effect on output	< 0,0085 %R.O/5°C	< 0,0055 %R.O/5°C
Compensated temperature range	-10 /+40 °C
Temperature range safe	-30 /+70 °C
Maximum safe central overload	150 %R.O
Ultimate central overload	300 %R.O
Excitation	5 V
Input impedance	395±20 Ω
Output impedance	350±3 Ω
Insulation resistance	>1000 MΩ
Construction	Adonized aluminium alloy
Environmental protection	IP66
Cable type	4x0,22 mm
Cable length	PS(6,10,20,40kg) 1 m RT(100,300,600 kg) 3m
Platform size	PS 30x30 cmRT 60x60 cm
Weight	PS 0,3kgRT 1,6kg

About Weighing System

Weighing system is the key conception in physics. It had its analogues in remote past and is intended for weighing of loads mass. Physically it sounds as weight W is the product of the mass m of the object and the magnitude of the local gravitational acceleration g; thus: W = mg, where W is equal to gravity force of a mass in ground-vertical axis.

There are several methods to use the weighing system which consists of set of measuring instruments. However today is offered more comfortable and accurate the way of weighing. That is load cell. Load cell is the best transducer to display the weight on the screen. Its principle of work bases on strain gage. Strain gage is electronic structure in various sizes and forms for analyzing static and / or dynamic resistance of a system or detached structure.

Load cell works on just a single axis, since it is applied in weighing.

Load Cell

Pancake Load Cells

HT(1) Series Load Cell is ideal for low and middle capacity applications. Low profiled and designed for both tension and compression applications. Highly withstands to overloading and to the effects of off-axis loading.

HT(2) Series Load Cell is ideal for middle and high capacity applications. Low profiled and designed for compression applications. Highly withstands to the effects of off-axis loading.

‘S’ Type Load Cells

ST Series Load Cell is suitable for low and middle capacity applications or for force meters. It is designed for tension or compression or both for tension and compression applications. Has ex-proof version.

ST-2W C Series Load Cell is ideal for middle and high capacity applications or for force meters. Has electrostatically charged paint cover and designed for compression applications.10 Tons capacity for tension applications is available.

ST-2W TC Series Load Cell is ideal for middle and high capacity applications or for force meters. Has electrostatically charged paint cover and designed for compression applications.10 Tons capacity for tension applications is available.

STA Aluminium Series Load Cell is ideal for low capacity applications or for force meters. Designed for tension or compression or for both tension and compression applications.

Shear Beam Load Cells

LT-5C Series Load Cell is single ended with IP68 nipple cable. Designed for compression applications. Has ex-proof version.

LTE Series Load Cell is single ended with IP68 nipple cable. Designed for compression applications.

Bending Beam Load Cells

BT Series Load Cell developed for low or middle capacity applications. Its cable is sealed to metal nipple. Protection level is IP68.

RT Series Load Cell designed for tension or compression or for both tension and compression applications. It is highly resistant to eccentric loading. Platform sizes are 60 cm x 60 cm.

PL Series Load Cell designed for tension or compression or for both tension and compression applications. It is highly resistant to eccentric loading. Platform sizes are 40 cm x 40 cm.

PS Series Load Cell designed for tension or compression or for both tension and compression applications. It is highly resistant to eccentric loading. Platform sizes are 30 cm x 30 cm.

PD Series Load Cell designed for tension or compression or for both tension and compression applications. It is highly resistant to eccentric loading. Platform sizes are 20 cm x 20 cm.

MT Series Load Cell designed for tension or compression or for both tension and compression applications. It is highly resistant to eccentric loading. Platform sizes are 15 cm x 15 cm.

Column Type Load Cells

CT Series Load Cell designed for truck scales and silo weighing applications. The body is completely closed with welding and is in IP68 class.

Web Tension Control Type Load Cells

RS Series Load Cell developed to control reel tension in winding / unwinding system. It shows the force applied to reel while load cell is in use.

Special Load Cells

Load Pin used at cranes for measurement of force on working platforms. It shows the force applied to reel by load by sending the electrical signal to display.

Weighing Indicator

HGX-1000 Weighing Indicator

HGX-1000 Weighing Indicator includes 3 digital inputs / 2 relay outputs feature and is able to communicate with PC and PLC systems.

FSM-2 Weighing Indicator

FSM-2 Weighing Indicator used in various weighing applications such as bench scales, silo and tank weighing platforms. Has an aluminium frame.

FSM-2 Ex-proof Weighing Indicator

FSM-2 Ex-proof Weighing Indicator is ideal for use in chemical and petroleum industries, encompassing explosion risk.

FSM-2 S Weighing Indicator

FSM-2 S Weighing Indicator has stainless steel box that protects from dust and water. Used in various weighing appliances such as platform scales, silo and tank weighing etc.

PA-10 Load Cell Transmitter

PA-10 Load Cell Transmitter is the signal amplifier to transmit the load cell signals to further distances or to make the load cell signal compatible with process control system. Signal output is 0-10V

PD-20 Load Cell Transmitter

PD-20 Load Cell Transmitter designed to combine reliable weight information from process vessels with extremely easy operation and setup. Output is provided in 4-20 mA signal format.

Weighing Systems

Phantom Crane Scale

Phantom Crane Scale is used for material weighing when it is loaded or unloaded. It may reset, lead to deadweight and sum. Has 20 mm 7 segments bright display. Produced in 2, 5, 7 ton capacities.

Check – Weigher

Check – Weigher is the weight control of packaged products carried on the conveyor belts. Over or lack of weight products are removed from the belt by means of air.

bending beam load cell